Flow & Heat Meters Archives - EMCT Global Trading

ELECTROMAGNETIC FLOW METER

Mechanical Data:

Materials: Electrode: 316L (Stainless Steel), Hastelloy, Titanium, Tantalum, etc. Liner: PTFE, Soft Rubber, Hard Rubber. Measuring tube: SUS 304 Body & Flange: Carbon Steel. Ground Ring: 316L (stainless steel), HC, Ti, Ta, Cu.
Connection of Flange: National Standard GB9119-88 (DIN2051, BS4504), JIS, ANSI. Screw. Insertion type, Tri-clamp for sanitary application.
Ambient Environment: Temperature: -Sensor: -40 to 80°C; Transducer: -15 to 50°C. Humidity: ≤85% (RH) at 20°C.
Measurable Fluid: Water
Fluid Temperature: -20°C~80°C, 80°C~130°C, 130°C~180°C Depending on Lining Material
Pressure: 10Bar, 16Bar Standard, 40Bar
Flow Velocity: Limit of Span 0.5~10m/s, 1~5m/s Recommended
Accuracy: 3% (Option), 0.5%, 1.0% of F.S.
Protection Ratings: Integral Type: IP65. Remote Type: Sensor IP68, Transducer IP65.
Ex-Proof Protection: Exde ib ii BT2

Electrical Data:

Power Supply: 220VAC ±10%, 50-60Hz, 24VDC ±10%. Battery power (3-5years)
Power Consumption: ≤8W
Output Signals: 4~20m ADC, Load ≤ 750ohm$, 0~3kHz, 5V with Source and Changeable Width. High terminal and Effective Frequency Output Voltage Output: 0-5 V DC
Communication Interface: RS232, RS485, HART
Display Unit: Flow rate (4-digits), Totalizer (9-digits), Velocity, Alarm status. Scale unit: selectable of L/h, L/m, L/s, m3/h, m3/m, m3/s .Flow direction: selectable by program. 3 Digits display below of decimal points. K-factor: 5 digits. Mounting: Integral type; Remote Type
Data Storage: Data Logger for 2-3years.

Approval:

Mechanical Data:

Electrical Data:

Power Supply: +24VDC +15% Applying to 4~20mA, Pulse, RS485, or 3.0V, 10AH lithium battery
Power Consumption: ≤ 0.5 W External, 3.0V lithium battery 12 Months (Internal)
Output Signals: 4~20mA DC, Pulse,
Communication Interface: RS485, HART
Display Unit: Flow rate, Totalizer

Approval:

Mechanical Data

Materials: Carbon steel (stainless steel for sensor), Sensor: PEEK, Protection, Cover: Nylon Plus Glass Fiber
Metrological Environment: Class C
Work Environment: Temperature: -30 to 45°C, Humidity: 100% (RH)
Protection Grade: IP68
Measurable Fluid: Water
Fluid Temperature: 0 to 80°C
Max. Pressure: 1.6MPa Standard, 2.5MPa Optional
Pressure Loss: DN15 - DN40: ΔP40 Pa; DN50 & above: ΔP10 Pa

Electrical Data

Power Supply: 2 Built-in Lithium Batteries / External DC8-24V Power Supply Optional
Power Consumption: Standard Condition < 30uA
Replacement Interval: 20 Years Above Continuously
Electromagnetism Grade: Class E2
Communication Interface: RS485, M-BUS
Spot Display: Screen with two rows: 9 digital accumulated flow display, 6 digital instantaneous flow display, various condition prompt symbols & units
Data Storage: Ferroelectric storage parameters usage, recording accumulated flow of 32 months and 31 days
Flow Measurement Cycle: Measurement condition: 1time/second (settable); Authentication Condition: 4times/second

Approval